RoboGem AquaGlide Y50S Cordless Robotic Pool Cleaner - Reconditioned - 6 Month Warranty

Reconditioned unit. Only one available. Inspected, cleaned and tested. It has cosmetic scratches on the rear housing, shown in the second photo. Comes with a 6 month Tasty Tech warranty. Ships from Cape Town.

A cordless robotic pool cleaner that cleans the floor, the walls and the waterline, with no hoses, no pump and no cables.

Features

• Cordless. Drop it in, pick a mode, lift it out. No hoses, no pump, no cables.
• Floor, walls and waterline. Climbs the walls and scrubs the waterline.
• Four modes. Floor only, wall only, waterline only, or all three together.
• App control. Connects by Bluetooth to the Smart Life (Tuya) app. Choose the mode before it goes in the water, as Bluetooth does not work under water.
• Zig-zag cleaning. Cleans in a zig-zag pattern and changes direction at the walls. It does not map the pool.
• Rubber tracks grip and pull the unit up the wall.
• Parks itself. Settles against the wall at the end of a clean, ready to lift out with the included hook.
• Rinse the filter basket and it is ready for the next run.

Is it right for my pool?

• Pool shape: works best in rectangular pools. Not suitable for round, oval or very irregular pools, or walls with a strong curve.
• Pool size: up to about 200 square metres, 0.5 to 3m deep.
• Pool surface: marbelite, fibreglass, tiled and vinyl. A normal slope down to the deep end is not a problem.
• Salt pools: can be used with salt up to 5000 ppm and chlorine up to 4 ppm.

Specifications

• Power: rechargeable battery, 5200mAh, 4 to 5 hours to charge.
• Run time: 90 to 120 minutes per charge.
• Coverage: floor, walls and waterline, four modes.
• Waterproofing: IPX8.
• Filter: 180-micron mesh basket for leaves, grit and debris.
• Pool range: water 0.5 to 3m deep, between 10 and 35 degrees.

Good to know

The cleaner runs on its own once it is in the water, but you drop it in and lift it out yourself. It is heavier when lifted out because it still holds water, so tip the water out first. Rinse the filter basket after every run (every 30 minutes in a very dirty pool) to keep suction strong, and make sure the charging port is fully dry before charging.

Keep the pool water at pH 7.0 to 7.4. Charge only with the original charger, and charge it at least once every three months when it is not in use.

What's in the box

• 1 x RoboGem Aquaglide Y50S machine body
• 1 x Power adapter
• 1 x Retrieval hook
• 1 x User manual and quick-start guide